Laminate flooring is a very practical alternative to wood and other flooring materials, especially with the huge variety of attractive patterns and surfaces available. Easy care and maintenance are among its major draws. Cleaning laminate floors is easy, as long as homeowners follow a few simple tips. If you use the right products and take steps to avoid excess dust and dirt build-up, your laminate floors should look lovely for years.

The floor mat will trap a huge amount of dirt and keep it from getting to the floors in the first place. Shake out the rug frequently. You will see just how much has been trapped and kept from getting to the floors. This one step could reduce cleaning time greatly. Also, avoid wearing shoes with sharp heel and keep your pets’ toenails clipped. Laminate floors can scratch but this can be prevented by using common sense.

In spite of your best efforts, cleaning laminate floors will be require – as do all floors – from time to time. Try to use products which do not leave excess moisture, as the additional moisture could cause some swelling. If water is used to wipe away a stain, make sure you wipe the floor dry and there shouldn’t be a problem.

It is best to use specific product made for cleaning laminate floors and to follow the manufacturer’s instructions carefully.

Sometimes it may be necessary to clean the entire floor. Here are the steps to take:

1. Gather your materials. For cleaning laminate floors, these should include a vacuum, a mop, lint free cloths and a cleaning solution. Choose a cleaning solution that is specially made for your laminate flooring. Most floor installers will recommend a specific product such as Bona or Pergo when installing the floor. Others recommend vinegar and water.

2. Dust the room first. Use a lint free cloth which attracts dust. Be sure the room has been swept first and pick up any large pieces of paper, debris, etc. If necessary, use a vacuum with a brush attachment and make sure the attachment is soft and won’t scratch the flooring. Before cleaning laminate floors, start from the top of the room and clean windows, shelves and other areas where dust settles (no point in cleaning your floor if dust will fall on it immediately afterwards). Once the dust and debris is off the walls and floor, the major work is done. This preliminary work should not have taken long.

3. Next step in cleaning laminate floors is to mop the floor, using your mop and the cleaning solution. Follow the “grain” of the flooring, mopping or wiping gently, to leave a streak-free shine. While laminate flooring is not a true wood product, it may resemble wood and it is best to mop in the direction of the grain. Work slowly and carefully, using the minimum amount of moisture needed to clean the floor. It is best to start in a corner of the room furthest from the door and work back to the doorway, making sure the entire room’s floor is cleaned. While you are mopping, inspect the floor carefully to make sure that all unsightly stains are removed properly.

4. Make sure you don’t leave the floor wet after you are done mopping. You can use a dry clean cloth to dry the floor.

As an alternative to the steps above, consider also using a modern electric steam mop for cleaning laminate floors. The good thing about a steam mop is that it cleans using only steam without any chemicals, and it does not leave watery residues behind. So it really is a convenient piece of equipment.

Easy cleaning and practicality make laminate flooring a popular and sensible choice for the modern home.


Having spent the bulk of the weekend working with the new MacBook Air, it is perhaps time for a follow-up review of the latest and greatest(!) Apple laptop computer. Click here for more information about Techwitty Ventures What is clear, is that this new model defines Apple’s move into a new class of computer and that one simple modification can change the entire character of a device. Mysterious? Well, perhaps.

The MacBook Air used was an 11 inch model (1.6GHz processor, 4GB memory and 128GB SSD). The design of the Air is meticulous with close attention spent to every conceivable detail. The screen is rich and crisp and the keyboard is a pleasure to use. But given that it is an Apple product, you knew that already. What was an unexpected surprise, is how heavy and chunky it makes the MacBook Pro look in comparison. Even thought the Pro is an amazingly thin and compact laptop in it’s own right, the design of the new Air manages to put it to shame.

We hooked the new Air into a 27 inch external display, initially worried that the mobile graphics card in the Air wouldn’t be terribly happy with it. Not a chance. The Air laughed in the face of the 27 inch, offering a crisp, responsive image with no delays or resolution issues. The 1.6GHz processor handled everything we threw at it with only one beach ball (for 2 seconds) the entire time the Air was in use (even when running Parallels 6 with Windows in the background).


But here was the biggest surprise. With the inclusion of solid state storage, the Air simply flew. When you launched an application, it didn’t even bounce while it was loading. It just appeared on the screen instantly. Compare that to bouncing six times when launching the same application on the MacBook Pro and you see the dramatic effect that such a small change can make. It is clear that the storage format has the greatest effect on the responsiveness of a system for the general user.

Obviously, power users would laugh at a 1.6GHz processor. But for the typical user who isn’t going to be running genetics algorithms most of the time, it is incredible how much we have been limited in the past by using hard drives instead of SSD. The retrieval of data is the defining factor for how responsive a system is, not the processor speed. Consumers have been hoodwinked for years with promises of lighting fast system responses because of processor speed doubling and even tripling. But SSD is the thing that makes the difference, not processing power.

People may disagree with this and say that processor speed is the kicker, but try the Air and you’ll see. The sooner we get this technology into all systems the better. Currently, replacing the HD in an iMac with a 256 GB SSD at point of ordering will cost over $500. More if you want a combination of HD and SSD. This is, quite frankly, excessive and the sooner the cost of SSD storage comes down, the better for everybody.

We are teetering on the edge of a new era of computing and the Air is the first mainstream example of this. Seriously, try one and you ain’t going back.



Solar panels are becoming more and more popular throughout the world as a potential mean to utilize energy considering the fact that people are becoming more conscious about consuming energy in an “environment friendly” way and at the same time our traditional sources of energy are drying out.

Now when it comes to using solar panels for producing energy, most people give quite a bit of emphasize on how to buy these panels or whether making them at the house will be a wiser option. Solar Panels Melbourne But beside these issues, one should also give proper emphasize on how to maintain the solar panels. If you are using your solar panels for a long time for producing energy and haven’t cleaned them at regular intervals then there is a good possibility that these days those panels are not operating as efficiently as they were in the early days. Therefore in order to make sure that your solar panels performing at their best, you need to put lot more emphasize on keeping them clean.

Now you might wonder how an energy producing solar panel can get dirty. Well the answer is pretty straight forward and simple. The solar panels are usually placed at the top of buildings or some other structures. This means they are very much exposed to the nature. So through time dust and other particles floating along the wind gradually starts to pile up on the panels which make them all dirty. Moisture is also a major source of dirt for the solar panels during night. In addition to this, insects, bird droppings, bugs etc. can get the panels dirty too for which they need to go through proper cleaning.

There is more than one way to keep a solar panel clean so that it can perform at its best to produce energy. You can use a good cleaning kit to clean the panels manually all by yourself. It is not only going to help you to maintain your energy making machine but at the same time will let you do some exercise too. So that is one option you might want to take under consideration.

Now if you are reluctant to clean your solar panels all by yourself, you can always call for experts to the job. There are some companies available out there that offers professional cleaning service for solar panels. Although this will cost you some money but you will be able to get some professional assistance for maintaining the panels. Another way of keeping your solar panels clean is by installing an automated cleaning system which will be cleaning the solar panels at regular intervals. The advantage of using such a cleaning device is that you don’t have to worry too much about cleaning your solar panels regularly because that part will be taken care off by the machine. However, this will obviously incur some additional costs.

You need to keep in mind that the option you should go for in order to clean your solar panels will depend a lot on your location. If you are living in an area where the solar panels may get dirty real fast due to the environmental condition then the automated cleaning device might be the right choice. But if you think that the panels does not require to be cleaned that frequently since you are living in a rather “solar panel friendly” environment then dealing with the cleaning process all by yourself or occasionally calling a cleaning service provider might work just fine for you. Just make sure that you are going for the right cleaning option depending on the circumstances.


Your vehicle is one of the most expensive purchases you can make, especially if you do not know much about it car detailing melbourne. You should have a good working knowledge of the vehicle model you own, however, there are other things to read up on as well. Keep reading to find out how you can save time and money down the road.

Ask the technician at the repair shop you are considering if they have done work on the same make and model of vehicle before. If they have, they probably know what it takes to make the needed repairs.

Wash your car often so you can prevent rust. Rust is an inevitability, but you can stave it off for a good while. A good wax is your best friend: a friend that will protect that shiny new paint job for a long time.

Be careful of mechanics who will do unnecessary work on your vehicle. A good mechanic should let you know if they noticed parts that are starting to get worn down and will need to be replaced soon but they should not replace the part without your approval. Never take your vehicle to a mechanic that preforms unnecessary repairs.

Ask for Original Equipment Manufacturer (OEM) parts. This means that you are getting manufacturer made parts and not replicas. It can cost a lot less to use parts that are generic, but you won’t get the most out of these things after a while. It may seem like you are getting a deal now, but it may end up costing you a lot in the future.

Before dropping your car off for repairs, remove any valuables. Mechanics might have to empty the inside of your vehicle and they cannot be held responsible if an item is damaged or missing. The same is true of your trunk or the bed of your truck.

Watch out for mechanics that don’t know what they’re doing. When they don’t listen to what you say or talk to you in circles, they’re probably a scammer. You should feel like you can trust them, so don’t fear seeing someone else.

Ask your mechanic if he has had experience working on your type of car. Yes, every car has an engine, a radiator, and a gas tank, but how they are built will vary greatly from vehicle to vehicle. If you don’t think he has, go to the dealer.

If you’re having serious repairs done on your vehicle, make sure to get multiple estimates. Most shops are on the up and up, but some will charge you for things that aren’t necessary. Find a shop that has a reputation for deal with your make of car. Your car is more likely to be repaired properly at these shops.

Do your friends or family have any recommendations for good repairers? Your loved ones might have some good recommendations for you to check out. That said, check up on who they refer as well. Use the web as a resource to find information about car repair shops.

As this article has explained, you should achieve a lot of benefits if you put forth the effort to learn more about auto repair. You can fix problems on your own or choose the right mechanic. Use these tips and fix problems yourself only if you are comfortable enough.